SR-1000

Cinema Surround Loudspeaker

The SR-1000 Cinema Surround Loudspeaker is a two-way design that features a 10" (254mm) low-frequency transducer with a 1" (25mm) compression driver. The 150 watt continuous power rating and sophisticated crossover circuitry provides absolute reliability.


The SR-1000 is designed for safe and secure mounting. The cabinet is constructed of 12mm MDF with internal bracing for superior structural integrity. The rear panel of the cabinet is fitted with four threaded insert mounting points that accommodate the standard bolt pattern for most third-party bracket manufacturers. Included pre-installed speaker side hardware allows fast single-installerwall mounting, and brackets support down- angles of either 15° (QM-SW, ordered separately) or 23° (QM-BW, ordered separately). A traditional U-bracket “yoke” style bracket (YM-300) is also available.


The compact black enclosure with black grille blends into any theatre decor.

Array of Q-SYS PL series speakers including linearray, subs and loudspeakers

This product has been discontinued. Please check with your Q-SYS regional sales representative for remaining stock availability. 

Consider the PL Series performance loudspeakers as a replacement:

  • The PL Series is a portfolio of performance loudspeakers designed to deliver premium sound for Q-SYS systems in a broader range of applications
  • Available in multiple form factors, enabling design flexibility and optimal audio experiences for every unique space

Features

  • High Performance for all Cinema applications
  • 10" (254 mm) woofer
  • 1" (25 mm) compression driver
  • Pre-installed speaker-side QM mounting hardware
  • Accepts YM-300 yoke bracket
SPECIFICATIONS SR-1000
Frequency Range 1
(-10dB, Half space)
64 Hz to 20 kHz
Rated Coverage Angle (-6 dB) 90° conical
Maximum Rated SPL 4
Calculated Peak at rated power
Calculated Continuous
122 dB
116 dB
Rated Impedance 8 ohms nominal
Rated Noise Power 2
Maximum Recommended Amplifier Power		 150 watts
500 watts
Sensitivity 3 94 dB
Input Connectors  
 
 
Two 5-way binding posts, accepts up to #10 AWG stranded wire
 
 
 
Transducers  
 
 
10” (254 mm) LF driver
1” (25 mm) HF compression driver
 
 
 
Enclosure Material  
 
 
12mm MDF with black vinyl wrap, matte finish
 
 
 
Dimensions (HWD) inches 19.5 x 11.7 x 11.5
Dimensions (HWD) mm 495 x 298 x 291
Net Weight 19.8 lb (9 kg)
Brackets  
 
 
QM-SW, QM-BW, YM-300
 
 
 

1 Free-field, -10 dB from on-axis sensitivity
2 AES2-1984 noise signal for 2 Hrs
3 On-axis, free-field sensitivity, 1W, 1 m
4 Calculated from rated noise voltage and sensitivity

Specifications are subject to change without notice.