AD-C821
8", 2 vías, cobertura cónica DMT de 90°
Características
- Woofer de 8" de baja frecuencia
- Transductor de compresión con diafragma de 1.4''
- Potencia nominal continua de 200 watts
- Transformador multitoma de 70V/100 V incluido (el sistema puede funcionar en modo distribuido o de baja impedancia)
- AD-C821 diseñado como un sistema de montaje invisible totalmente integrado
AD-C821 se vende en los siguientes paquetes de sistema:
- SISTEMA AD-C821R
- Sistema de altavoces de montaje invisible AD-C821
- Anilla abierta y rieles de baldosa
- Rejilla redonda AD-C800RG (blanco, se puede pintar)
- SISTEMA AD-C821S
- Sistema de altavoces de montaje invisible AD-C821
- Anilla abierta y rieles de baldosa
- Rejilla cuadrada AD-C800SG (blanco, se puede pintar)
SPECIFICATIONS | AD-C821 |
Configuration | Passive |
Low-frequency Transducer | 8-inch (203 mm) ferrite woofer |
Hight-frequency Transducer | 1.4-inch (36 mm) neodymium compression driver |
Frequency Range 1 Frequency Response (-6 dB) Useable Frequency Range (-10 dB) | 61 Hz to 18 kHz 52 Hz to 18 kHz |
Maximum Output 2 Calculated Peak Output Calculated Continuous Output | 120 dB SPL 114 dB SPL |
Nominal Coverage | 90° conical DMT™ |
Nominal Impedance | 16 ohms |
Power Rating Continuous power handling3 Recommended amplifier power (loudspeaker "program" power) | 200 W 400 W |
Sensitivity | 91 dB SPL, 1W/1m |
Bass Loading | Ported |
Transformer Type | Custom low distortion laminated core, wide bandwidth design |
Transformer Taps | 100 V: 16 ohms bypass, 100 W, 50 W, 25 W 70 V: 16 ohms bypass, 100 W, 50 W, 25 W, 12.5 W |
Agency Rating | CE, UL 1480 (commercial/professional use) UL 2043 (air handling spaces) |
ENCLOSURE | |
Enclosure Volume | 18 liter (0.64 ft³) |
Connectors | Two 2-pin Euro-style connectors |
Mounting Hardware | Captive, integral Mounting Clamps. Insert enclosure into mounting hole, and tighten. Suspended ceiling Split-ring and Suspended Ceiling Tile Rails - sold separately. |
Weight - Net | 16 lb (7.3 kg) |
Dimensions | Diameter: 13.4-inch (340 mm) Depth: 11.9-inch (302 mm) |
1 All frequency ranges specified refer to measured half-space response (2 pi).
2 Calculated maximum peak SPL at 1 m, half-space, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.
3 Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.
Specifications are subject to change without notice.
QSC and the QSC logo are registered trademarks of QSC Audio Products LLC in the U.S. Patent and Trademark office and other countries.
AcousticDesign is a trademark of QSC Audio Products, LLC. MATE-N-LOK is a trademark of Tyco. All other trademarks are the property of their respective owners.