AD-C8T-SWZB
8-inch, ceiling-mount subwoofer
Features
- 8-in ceiling subwoofer with bezel-less design
- Consistent tonal characteristics across the entire AcousticDesign Series for surface, ceiling, and pendant applications
- DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area
- Snap-fit magnetic grille
- 3x double stepped, long travel dog-ear blind mount system
- Intrinsic Correction™ voicings available via the Q-SYS Platform including CX-Q amplifiers
- Blemish-free removable logo
- Removable conduit cover plate, also available as accessory for pre-install wiring
- UL1480 and UL2043 certified
- Available in white (RAL 9003), with black grille accessory sold separately.
SPECIFICATIONS | AD-C8T-SWZB |
LF transducer | 8 in (203 mm), 2.0 in. (50.8 mm) voice coil, ferrite |
Enclosure configuration | Ceiling Subwoofer, Bass Reflex |
Coverage | Omni |
Filter | 125 Hz Low Pass, Passive |
System bandwidth (1) | -3 dB: 65 Hz - 155 Hz |
Sensitivity (2) | 92.3 dB @ 1 W/ 1 m |
Max SPL (continuous) (3) | 113 dB |
Max SPL (peak) (4) | 125 dB |
Max SPL (calculated) (5) | 123 dB |
Power rating | Continuous power 250 W @ 8Ω, rated Power 500 W |
Bypass impedance | 8 Ω |
Minimum impedance | 6.4 Ω @ 118 Hz |
Taps (70v/100v) | 25 W, 50 W, 100 W, 200 W / 50 W, 100 W, 200 W |
Enclosure material | ABS baffle on powder coated steel backcan |
Enclosure color | Black back-can, white grille (RAL 9010) |
Connectors | 4-pin 0.2 in (5 mm) Euroblock connector with parallel output |
Dimensions (H x W x D) | 13.5 x 13.5 x 13.75 in (342.9 x 342.9 x 349.25 mm) |
Cutout dimensions | 305 mm |
Shipping dimensions (H x W x D) | 19.5 x 17.5 x 32 in (495.3 x 444.5 x 812.8 mm), pair packed |
Weight | 22.4 lb (10.1kg) |
Included accessories | Tile rails & screws, tile rings, cardboard cutout templates, wire connector, white grille |
Optional accessories (sold separately) | AD-MR8 (pre-install mud ring), AD-C245BG-BK black grille |
Ingress protection | IP-44 |
Safety agency | UL1480A, UL2043, NFPA 90A, NFPA70 suitable for use in air handling spaces. ROHS, CE compliant. |
1Default voicing, No sub High Pass, Smoothed
21 W/1 m, Averaged on 200-10 kHz (System), 200-2 kHz (LF) or 1k-10 kHz(HF)
3 Used for simulation. Measured 1m on-axis in free space after 1mn. Pink noise 12 dB crest Factor into RMS protection, Z weight, RMS value
4Same as Continuous SPL +12 dB CF
5Provided for reference with former specs, Calculated from continuous noise power and sensitivity +6dB, default horn
6Max voltage during 2 h without transducer permanent damage. Protection voltage may be lower.