Synapse D16Mio

Dante™/AES67 networked audio interface (Attero Tech)

  • Hero front left-angled view of a Synapse D16Mio
  • Hero front view of a Synapse D16Mio
  • Hero back view of a Synapse D16Mio

The Attero Tech Synapse D16Mio is a high-performance networked audio interface supporting Dante™ with AES67 interoperability. The D16Mio features 16 channels of studio grade microphone preamplifers, with up to 51 dB of digitally controlled gain in 3 dB steps. Each microphone input also supports +48 V switchable phantom power and a switchable pad for accommodation of professional line level inputs. The balanced line level outputs feature digitally controlled output attenuation from 0 to -100 dB.

Connect to Q-SYS Reflect

This Q-SYS Product can be connected to our powerful monitoring and management solution.

Start your free trial today!

Key Features

  • 16 studio-grade mic preamps with line level capability
  • Front panel or network control of mic preamp gain, phantom power, mic/line input sensitivity
  • 16 line level balanced outputs with front panel or network level control
  • Q-SYS Extension allows for drag-and-drop integration into your Q-SYS design

Synapse D16Mio Specifications:

Mic/Line Inputs (16 Channels)  
Maximum input level -43 dBu (max mic gain)
+24 dBu (pad active – line mode)
Input type 3-pin depluggable terminal block
Analog Outputs
(16 Channels)
Maximum output level +24 dBu
Input type 3.8 mm terminal blocks
Dynamic range >110 dB
Headphone Output  
Connector 1/4 in TRS jack
Load 32 Ω minimum
Audio Networking  
Protocol support Dante™ with AES67 support
Channel count 16 Dante RX, 16 Dante TX
Ports 2 - Gb Copper on RJ-45, 2 - Gb SFP
Sample rates 16/24-bit, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Dimensions (HWD) 1 RU form factor
1.75 x 19 x 12.5 in
(44.5 x 482.6 x 5080 mm)
Weight 6 lb (2.72 kg)