SR Series

Surround channels draw the audience into the action by creating an immersive multidimensional soundscape. It takes power, fidelity, and coverage to accurately create that experience in an auditorium. With a range of compact enclosures that fit every decor, our Cinema Surround loudspeakers offers the perfect surround solution for any size theater. The all new surround speaker range now offers improved audio performance and better styling to look as good as they sound. Surround loudspeakers are purpose-built for cinema deployment.

Our SR Series surround loudspeakers are made from quality MDF or plywood enclosures that deliver extended bass response over wide coverage areas.

High-output drivers project cleanly to every seat. The uniform power response of these loudspeakers is a result of Directivity Matched Transition® (DMT), a design approach that matches LF and HF coverage in the crossover region.

Most models in the SR Series feature pre-installed speaker-side hardware that allows fast single-installer mounting, and brackets that support down-angles of either 15° (standard) or 23° (optional). We also include parallel outputs to make multi-speaker connections easy.

SELECT A MODEL

SR-Series

  SR-800 SR-8101 SR-1000 SR-8200 SR-1020 SR-1030 SR-1290 SR-1590 SR-5152
System Type 2-way 2-way  2-way 2-way 2-way 2-way Coaxial 2-way Coaxial 2-way 2-way
Frequency Range at -10 dB (Hz) 1 60 Hz - 20 kHz 54 Hz - 20 kHz  64 Hz - 20 kHz 52 Hz - 20 kHz 50 Hz - 20 kHz 56 Hz - 20 kHz 50 Hz - 20 kHz 50 Hz - 20 kHz 44 Hz - 18 kHz
Nominal Coverage2 135° conical 130° H x 110° V 90° conical  90° H x 90° V 90° H x 90° V 90° H x 90° V 90° H x 90° V 90° H x 90° V 75° Axisymmetric
Nominal Impedance 8Ω  8Ω   8Ω 8Ω  8Ω  8Ω 4Ω 4Ω 8Ω
Rated Noise Power3 125 W 125 W  150 W 200 W 300 W 400 W 400 W 500 W 625 W
Sensitivity4 90 dB 91 dB  94 dB 94 dB 94 dB 95.5 dB 96 dB 98 dB 96 dB
Driver Information 8" low-frequency
transducer
1" soft dome tweeter		 8" low-frequency
transducer
1" soft dome tweeter		 10" low-frequency
transducer
1" compression driver		 8" long throw low-frequency
transducer,
1.4" titanium diaphragm
compression driver on an
Axisymmetric horn		 10" low-frequency transducer,
1.4" titanium diaphragm
compression driver on an
Axisymmetric horn		 10" long throw lowfrequency
transducer,
1.75" titanium diaphragm
compression driver on an
Axisymmetric horn		 12" low-frequency
transducer with
coaxially-mounted
1.75" compression driver		 15” (380 mm) LF driver with coaxially-mounted
3” voice coil HF driver		 15" low-frequency tranducer, 
3" diaphragm compression driver
Dimensions (HWD) inches5 14.4 x 11.7 x 9 19.5 x 12 x 9.6  19.5 x 11.7 x 11.5 19.5 x 14.3 x 9.6 19.5 x 15.8 x 10.2 19.5 x 15.8 x 10.2 20.25 x 15.75 x 12.75 23.6 x 19.7 x 14.2 32 x 17.5 x 15.2
Dimensions (HWD) mm5 365 x 298 x 228.5 495 x 305 x 244  495 x 298 x 291 495 x 363 x 244 495 x 401 x 259 495 x 401 x 259 515 x 400 x 325 605 x 500 x 360 813 x 445 x 386
Weight6 14.3 lb / 6.5 kg 18.6 lb / 8.4 kg  19.8 lb / 9 kg 24.5 lb / 11.1 kg 27.1 lb / 12.3 kg 32 lb / 14.5 kg 35 lb / 16 kg 48 lb / 22 kg 80 lb / 36.2 kg
Brackets7 QM-SW, QM-BW, YM-300 QM-SW,
QM-BW,
YM-300		  QM-SW, QM-BW, YM-300 QM-SW,
QM-BW,
YM-46		 QM-SW,
QM-BW,
YM-400		 QM-SW,
QM-BW,
YM-400		 QM-SW,
QM-BW,
YM-400		 QM-SW,
QM-BW,
YM-500		  UB-325-13,
MM-120-BT
  Details Details  Details Details Details Details Details Details Details
1 All frequency ranges specified refer to measured free field response (4 pi).
2 Averaged from 1 kHz to 10 kHz, -6 dB, except SR-8101 which is averaged from 1 kHz to 8 kHz.
3 2 hours of 6 dB crest factor pink noise, AES method.
4 Based on nominal impedance, measured in free-field 1 W @ 1 m, except SR-1290 and SR-1590, measured with 2.0V @ 1 m.		 5 Dimensions do not include pre-installed speaker mounting bracket.
6 Unit net weight, all units are pair packed except SR-1290, SR-1590, and SR-5152, which are single packed.
7 QM-BW recommended for rear wall surrounds in steep stadium applications only. Sloped floor and moderate stadium applications should use the QM-SW on side and rear walls. Yoke mounts can be used when adjustable aiming is required.


All specs are subject to change. DCS surrounds connect with barrier strip screw terminals that accept up to #10 AWG stranded wire.