AD-S282H
Doble, de 8 pulgadas y 2 vías, 90° x 60° (giratorio)
Características
- Caja y componentes modernos y resistentes a la intemperie - ideales para una amplia gama de aplicaciones.
- Sistema doble de 8 pulgadas y 2 vías en una caja multiusos ligera con una rejilla resistente de aluminio con recubrimiento electrostático.
- Versátiles opciones de montaje - El soporte de montaje de estribo que viene incluido se puede utilizar para instalar y orientar el sistema en orientaciones verticales u horizontales. La disposición para el soporte opcional Omni-mount™ viene integrada.
- La guía de ondas giratoria Advanced Directivity™ (90° × 60°) permite enfocar el sonido del altavoz con precisión, independientemente de la orientación montada de la caja.
- Versiones de baja impedancia y transformador - Se puede seleccionar el sistema estándar de 8 ohms para funcionamiento pasivo o biamplificado, mientras que la versión de transformador AD-S282HT proporciona tomas para el uso de sistema de altavoces distribuidos de 70V y 100V.
Package Includes:
AD-S282H or AD-S282HT loudspeaker
Yoke mount and hardware
Connector protection cap
| SPECIFICATIONS | AD-S282H / AD-S282HT | ||||||||
| Configuration | Compact two way, ported enclosure | ||||||||
| Transducers Low Frequency Transducer High Frequency Transducer | Dual 8-inch high power, treated paper cone, 2-inch voice coil, neodymium magnet 1-inch high output compression driver | ||||||||
| Frequency Range1 Frequency Response (-6 dB) Useable Frequency Range (-10 dB) | 80 Hz - 27.7 kHz 60 Hz - 29.5 kHz | ||||||||
| Maximum Output (SPL at 1 m)2 Fullrange (passive mode) LF (biamp mode) HF (biamp mode) |
| ||||||||
| Nominal Impedance Passive LF HF | 8 ohms 8 ohms 8 ohms | ||||||||
| Power Rating3 Passive LF HF | 450 W (IEC 8 hours) 500 W (IEC 8 hours, 50 Hz - 2 kHz) 45 W (IEC 8 hours, 2 kHz - 20 kHz) | ||||||||
| Recommended Max Amp Power (Passive) | 900 W RMS | ||||||||
| Sensitivity (SPL, 1 W at 1 m)4 Passive LF HF | 93 dB (100 Hz - 10 kHz) 97 dB (200 Hz - 2 kHz) 104 dB (2 kHz - 10 kHz) | ||||||||
| Nominal Coverage | 90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) | ||||||||
| Bass Loading | Ported, tuned to 60 Hz | ||||||||
Transformers (AD-S282HT) | |||||||||
| Type | Custom low distortion laminated core, wide bandwidth design | ||||||||
| Taps | 70V 200, 100, 50, 25 W; 8Ω bypass 100V 200, 100, 50 W; 8Ω bypass | ||||||||
Enclosure | |||||||||
| Material | Injection molded, weather resistant, high impact polystyrene | ||||||||
| Finish | White or black (paintable) | ||||||||
| Weather Resistant | Yes | ||||||||
| Grille | Heavy duty powder coated aluminum | ||||||||
| Connectors | Barrier strip, (switchable: passive/active on AD-S282H) | ||||||||
| Mounting Hardware | Yoke mount (included) | ||||||||
| Weight | 27.7 lb (12.6 kg) net 35.6 lb (16.1 kg) shipping | ||||||||
1 All frequency ranges specified refer to measured free field response (full space, 4pi)
2 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
3 Continuous IEC specified test signal
4 Based on nominal impedance, measured in full-space.
All specifications are subject to change without notice.