Screen Channel Low Frequency Components
Screen Channel Low Frequency Components

QSC announces divestiture of its Digital Cinema Series product line to Moving iMage Technologies, including the Screen Channel (“SC”), Subwoofer (“SB”), Surround (“SR”), and Screen Channel (“RSC”) product lines. 

For all inquiries, please visit DSCreference.com or contact [email protected]


Designed not only to deliver, but to thrive on today’s pushed-to-the-max soundtracks, QSC low-frequency components bring out the full richness of screen channel sound. Unlike re-purposed rock and roll PA cabinets, our LF components are built from the ground up with cinema-specific details that speed up installation. For example, offset terminal cups and pre-installed rubber feet.

We also enhance performance with smart design by using tight driver spacing in our multi-driver boxes to improve coupling and widen coverage angles. LF components are the foundation of full, clear screen channel sound, and nobody builds better screen channel enclosures than QSC.

1 Driver Models

Model LF-3115 LF-4115
System Models 2-way: SC-312XC

2-way: SC-412C
3-way: SC-413C
4-way: SC-414

Driver Information

15" (381 mm)
high-efficiency,
extended bass woofer,
3" copper voice coil

15" (381 mm)
high-efficiency,
extended bass woofer,
4" copper voice coil

Impedance
Rated Noise Power1 400 W RMS 500 W RMS
Sensitivity2 95.5 dB 95.5 dB
Dimensions (HWD) inches  18.63 x 30 x 20.25 18.63 x 30 x 20.25
Dimensions (HWD) mm 473.2 x 762 x 514.4 473.2 x 762 x 514.4

1 2 hours of 6 dB crest factor pink noise, AES method.
2 Based on nominal impedance, measured in half space 1 W @ 1 m.


LF components connect with barrier strip screw terminals that accept up to #10 AWG stranded wire except for LF-4215-8F, which uses Neutrik Speakon™ NL4.

2 Driver Models

Model 2150-LF LF-4215 LF-4215-8 LF-4215-F LF-4215-8F
System Models

3-way: SC-2150

2-way: SC-422C
3-way: SC-423C
4-way: SC-424

3-way: SC-423C-8
4-way: SC-424-8

3-way: SC-423C-F

4-way: SC-424-8F

Driver Information 15" (381 mm) high-efficiency,
extended bass woofer,
3" copper voice coil

15" (381 mm)
high-efficiency,
extended bass
woofer,
4" copper voice coil

15" (381 mm)
high-efficiency,
extended bass
woofer,
4" copper voice coil

15" (381 mm)
high-efficiency,
extended bass
woofer,
4" copper voice coil

15" (381 mm)
high-efficiency,
extended bass
woofer,
4" copper voice coil

Impedance
Rated Noise Power1  500 W RMS3 1000 W RMS 1000 W RMS 1000 W RMS 1000 W RMS
Sensitivity2 100 dB 99.5 dB 99.5 dB 99.5 dB 99.5 dB
Dimensions (HWD) inches 38.3 x 30 x 14.5 35.75 x 30 x 20.25 35.75 x 30 x 20.25 40 x 31.5 x 19 40 x 31.5 x 19
Dimensions (HWD) mm 972 x 762 x 368 908.1 x 762 x 514.4 908.1 x 762 x 514.4 1016 x 800.1 x 482.6 1016 x 800.1 x 482.6

1 2 hours of 6 dB crest factor pink noise, AES method.
2 Based on nominal impedance, measured in half space 1 W @ 1 m.
3 AES2-1984, 2 hrs, Power = Vrms2/Znom


LF components connect with barrier strip screw terminals that accept up to #10 AWG stranded wire except for LF-4215-8F, which uses Neutrik Speakon™ NL4.

3 and 4 Driver Models

Model LF-4315 LF-4215 x 2
System Models

3-way: SC-433C
4-way: SC-434

3-way: SC-443C
4-way: SC-444

Drivers 3

4

Driver Information

15" (381 mm)
high-efficiency,
extended bass woofer,
4" copper voice coil

1

15" (381 mm)
high-efficiency,
extended bass woofer,
4" copper voice coil

Impedance 5.5Ω
Rated Noise Power1 1500 W RMS 2000 W RMS
Sensitivity2 99.5 dB 102.5 dB
Dimensions (HWD) inches 53 x 30 x 20.25 72 x 30 x 20.25
Dimensions (HWD) mm 1346 x 762 x 514.4 1820 x 762 x 514.4

1 2 hours of 6 dB crest factor pink noise, AES method.
2 Based on nominal impedance, measured in half space 1 W @ 1 m.


LF components connect with barrier strip screw terminals that accept up to #10 AWG stranded wire except for LF-4215-8F, which uses Neutrik Speakon™ NL4.