QSC announces divestiture of its Digital Cinema Series product line to Moving iMage Technologies, including the Screen Channel (“SC”), Subwoofer (“SB”), Surround (“SR”), and Screen Channel (“RSC”) product lines. 

For all inquiries, please visit DSCreference.com or contact [email protected]

The SB-118F single 18-inch and SB-218F dual 18-inch subwoofers are designed specifically for low frequency enhancement in cinema applications, especially for low frequency content of the surround channels using bass management techniques. A common application is suspending these enclosures from the cinema ceiling in proximity to the wall mounted surround loudspeakers for which the SB-118F/218F provides low frequency enhancement. The SB-118F/218F covers the frequency range from 37 Hz to 230 Hz.

These enclosures are designed for safe and easy suspension using eight built-in M10 fly points. Heavily braced, tour grade 15 mm plywood construction provides great strength while keeping weight to a minimum. The custom 800 watt, 18-inch transducers were developed especially for cinema use. They feature large 4-inch (101 mm) voice coils and a multi-vented pole piece to ensure cool operation, even at high power levels. Cooler temperatures increase transducer lifespan and decrease the problem of power compression at high power.


The SB-218F enclosure features separate chambers for each transducer. In the rare event of a transducer failure, this prevents over-excursion of the remaining transducer caused by improper box loading. Both models feature 4 ohm impedance, which means that you can use a smaller amplifier to get maximum output from the loudspeaker.

Features

  • High output performance with 1600 W / 6400 W continuous power rating
  • Eight built-in M10 mounting points for overhead suspension
  • 15 mm plywood construction for increased cabinet structural integrity
  • 4 ohm impedance for efficient amplifier power
  • Side mounted hand holds for easy handling during installation
  • Foam-lined perforated steel grille
  • Barrier Strip and Neutrik SpeakOn® connection
PRELIMINARY Specifications SB-218F
Configuration 2 x 18-inch, subwoofer
Frequency Response (-6 dB) 37 Hz – 230 Hz
Frequency Response (-10 dB) 32 Hz – 230 Hz
Power Capacity2: Continuous/Peak 1600 W / 6400 W
Sensitivity (1W, 1m) 101 dB
Output1 (Peak SPL @ 1m) 139 dB
Driver 2 x 457 mm (18-inch) drivers with 101 mm (4-inch) voice coils
Nominal Impedance 4 ohms
Input Connectors 2 x NL4, 1 x barrier strip
Enclosure 15 mm plywood, black texture finish. Hand holds on each side
Grille Perforated, powder-coated steel, foam-lined
Mounting Eight (8) M10 threaded mounting points
Net Weight 168 lb / 76.4 kg
Shipping Weight 183 lb / 83.2 kg
Dimensions (WxHxD) inches 46.5 x 23.2 x 25.25
Dimensions (HxWxD) mm 1180 x 595 x 640


  With QSC processing
2  Power that the device can withstand for 2 hours without permanent change in acoustical, mechanical,
    or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedances

Specifications are subject to change without notice.