WL212-sw
Passive Dual 12-inch Flying Subwoofer
Features
- Extraordinarily compact (only 20-inch / 508 mm wide) and lightweight (38 lb / 17.2 kg)
- High acoustic output (133 dB SPL peak)
- Wide 140° horizontal coverage
- High power, 8-inch neodymium LF / MF drivers provide low-frequency extension to 62 Hz without subwoofers
- 3-inch diaphragm compression driver on QSC's patented 140° multiple diffraction aperture waveguide (Patent No. 7,177,437)
- Patented (D576,660) side-mounted vent ports designed for double duty as handles
- Simple, easy-to-use rigging system supports arrays of up to 12 units with 10:1 design factor
- Flexible ground stack capability
- Fully supported in EASE and EASE Focus acoustic software
- Birch ply enclosures. Available with standard finish in black.
- Designed for tri-amplified operation. DSP settings are available on Q-SYS, SC-28, PLD amplifiers and CXD amplifiers.
| SPECIFICATIONS | WL3082 | WL212-sw |
| Configuration | Dual 8-inch, 3-way, triamp line-array | Dual 12-inch, 4th-order bandpass subwoofer |
| Transducers High-frequency Low-frequency | 1.4-inch exit, 3-inch diaphragm, neodymium magnet compression driver Dual, 8-inch woofer, 2.5-inch voice coil | - Dual, 12-inch woofer with a 4-inch voice coil, ceramic magnet assembly |
| Frequency Response (±3 dB) | 68 Hz - 18 kHz | 40 Hz - 100 Hz |
| Frequency Range (-10 dB) | 62 Hz - 20 kHz | 32 Hz - 107 Hz |
| Nominal Impedance | HF: 16 ohms MF: 16 ohms LF: 16 ohms | SUB: 4 ohms |
| Continuous Power Capacity1 | HF: 85 W MF: 250 W LF: 250 W | LF: 1100 W |
| Maximum Output, Continuous / Peak (dB SPL at 1 m) | HF: 127 dB SPL / 133 dB SPL MF: 122 dB SPL / 128 dB SPL LF: 122 dB SPL / 128 dB SPL | LF: 129 dB SPL / 135 dB SPL |
| Nominal Coverage | H: 140° V: dependent on number of elements used | - - |
| Enclosure Type | Ported, trapezoidal | 4th-order bandpass |
| Enclosure Material | 15 mm birch plywood | 15 mm birch plywood |
| Finish | Available in black | Available in black |
| Grille | Perforated, 16AWG steel, backed with black cloth fabric | - |
| Connectors | Two NL8 in parallel | Two NL8 in parallel |
| Pin Outs | 1+/1- NC 2+/2- LF 3+/3- MF 4+/4- HF | 1+/1- Sub 2+/2- NC 3+/3- NC 4+/4- NC |
| Attachment Points | Integral, side plate adjustable rigging system, vertical splay adjustable in 1° increments from 0° - 10° | Integral, non-adjustable |
| Dimensions (H×W×D) | 229 × 508 × 406 mm 9 × 20 × 16 in | 381 × 508 × 737 mm 15 × 20 × 29 in |
| Carton Dimensions (H×W×D) | 610 × 356 × 457 mm 24 × 14 × 18 in | 660 × 510 × 838 mm 26 × 20 × 33 in |
| Net Weight | 17 kg / 38 lb | 49.4 kg / 109 lb |
| Shipping Weight | 21.3 kg / 47 lb | 56.7 kg / 125 lb |
| Available Accessories | AF3082-L AF3082-S EB3082 PB3082 | AF3082-L AF3082-S CP212-0 Wood cart EB3082 |
1 Two hours, IEC specified noise
Specifications are subject to change without notice.