PS-1600H
Page Station with command keypad and a handheld mic
	
This product has been discontinued. Please check with your Q-SYS regional sales representative for remaining stock availbility.
Consider the PS-TSCG3 Touchscreen Paging Station as a replacement:
- The Q-SYS PS-TSCG3 Touchscreen Paging Station pairs with the TSC-70-G3 touchscreen and Q-SYS control engine to enable a broad range of paging applications with a modernized user experience
 - Features a gooseneck microphone model for desktops and a handheld microphone model for wall-mount
 
Features
- Capacitive touch, programmable keypad and 240 x 64 graphics LCD for flexible customization
 - Fully compatible with all Q-SYS systems. Simply connect to a Q-SYS system (with version 2.0 software or later) and all paging functions are available without the need for additional hardware boxes
 - Second microphone input and GPIO allow one Page Station to serve two locations
 - Dual Ethernet connections support network redundancy
 - May use Power over Ethernet (PoE) or local power supply
 - Rugged, handheld PTT (Push To Talk) microphone with convenient magnetic mount included
 - Q-SYS technical support is available 24/7 - worldwide
 
Page Station Models
| Model | Microphone Type* | Assignable Buttons | 
| PS-1650H | PTT Handheld | 16 | 
| PS-1600H | PTT Handheld | 4 | 
| PS-1650G | Gooseneck | 16 | 
| PS-1600G | Gooseneck | 4 | 
| SPECIFICATIONS | Page Station | 
| Audio Channel Capacity | 2 line inputs, 1 line output | 
| Front Panel Controls | Paging Keypad: Capacitive touch keypad Microphone: PTT momentary switch  |  
| Front Panel Indicators | Talk, Ready, Busy: Bi-color LEDs (red/green) Keypad button activity: Green LEDs LCD: 240 x 64 monochrome graphics display  |  
| Front Panel Connectors | RJ45 microphone connector | 
| Rear Panel Connectors | Q-SYS Network LAN A: RJ45 1000 Mbps only Q-SYS Network LAN B: RJ45 1000 Mbps only DC power +24V inlet: 2-pin Euro receptacle Line input: 3-pin Euro receptacle Line output: 3-pin Euro receptacle GPIO: 6-pin Euro receptacle  |  
| Line Voltage Requirements | IEEE 802.3af power over Ethernet (POE) or +24V DC | 
| Dimensions (HWD) inches | 10.37 x 8.3 x 1.5 | 
| Dimensions (HWD) mm | 264 x 211 x 38 | 
| Accessories Included | Hardware user manual, connector ship kit, warranty card and PTT handheld microphone  |  
| Line Input | |
| Dynamic Range Unweighted A-weighted  |  > 115 dB > 118 dB  |  
| Distortion  (20 Hz - 20 kHz, all sensitivities) +4 dBu (max) 2 dB below clip  |  < 0.009% THD+N < 0.009% THD+N  |  
| Crosstalk (20 Hz - 20 kHz) Inter-channel (max) Inter-channel (typical) Intra-channel (max) Intra-channel (typical)  |  > 75 dB > 90 dB > 85 dB > 100 dB  |  
| Frequency Response 20 Hz - 20 kHz (max) 20 Hz - 20 kHz (typical)  |  ± 0.5 dB ± 0.2 dB  |  
| Input Impedance Balanced (nominal) Unbalanced (nominal)  |  10k ohms 10k ohms  |  
| Common Mode Rejection 20 Hz - 20 kHz (max) 20 Hz - 20 kHz (typical)  |  > 54 dB > 60 dB  |  
| Input Sensitivities | Vrms: 1.5, 3, 9, 18 dBu: 5.7, 11.8, 21.3, 27.3 dBv: 3.5, 9.5, 19.1, 25.1  |  
| Line Output | |
| Dynamic Range Unweighted A-weighted  |  > 112 dB > 115 dB  |  
| Crosstalk (20 Hz - 20 kHz) Inter-channel (max) Inter-channel (typical) Intra-channel (max) Intra-channel (typical)  |  > 75 dB > 90 dB > 85 dB > 100 dB  |  
| Mute | Infinite attenuation | 
All specifications are subject to change without notice.