unDX4I
Dante network audio wall plate 4x2 mic/line I/O (Attero Tech)
The Attero Tech unDX4I is a cost-effective multi-IO Dante network audio I/O wall plate, featuring four balanced mic/line XLR inputs and two balanced line outputs on a Phoenix connector. Designed to fit into most dual gang US junction boxes, the unDX4I is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The unDX4I’s size and I/O density make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink - thereby eliminating costly and interference prone analog wiring.
Features
- Dante Domain Manager ready
- Four balanced XLR mic/line inputs
- Two balanced line outputs on Phoenix depluggable connectors
- PoE powered
- Three software-adjustable input gains accommodate common line levels, phantom power and dynamic microphones.
- +48 V phantom power per channel
- Q-SYS Extension allows for drag-and-drop integration into your Q-SYS design
unDX4I Details:
| Audio Inputs | |
| Input types | 4x XLR (balanced and RF filtered) |
| Gain | -18 dB, -3 dB, +25 dB and +40 dB, software selectable |
| Maximum input level | +20 dBu @ -18 dB gain, +6 dBu @ - 3 dB gain, -23 dBu @ +25 dB gain -38 dBu @ +40 dB gain |
| Phantom power | +48 V, software selectable |
| Audio Outputs | |
| Output type | Two balanced line level with automatic muting on loss of Dante signal on 3-pin depluggable Phoenix |
| Attenuation range | Software controlled volume (0 to -60 dB, 1 dB increments) |
| Maximum output levels | +20 dBu at 0 dB attenuation |
| Dante Network | |
| Physical level | Standard ethernet |
| Connector | Single RJ-45 |
| Cable quality | CAT-5e or higher |
| Transmission speed | 100 Mbps |
| Supported sample rates | 44.1 kHz, 48 kHz |
| General | |
| PoE | 802.3af PoE PD compliant |
| Dimensions (HWD) | 4.2 x 3.5 x 2 in (114.3 x 88.9 x 50.8 mm) Decora wall plate (2-gang): 4.87 x 4.94 x 0.08 in (123.7 x 125.48 x 2.03 mm) |
| Weight | 0.6 lb (.27 kg) |