• Hero group shot of the black in color AcousticDesign Series Premium loudspeakers ordered by height and size
  • Hero group shot of the white in color AcousticDesign Series Premium loudspeakers ordered by height and size
  • Hero group shot of the black in color AcousticDesign Series Premium loudspeakers
  • Hero group shot of the white in color AcousticDesign Series Premium loudspeakers

AcousticDesign™ surface loudspeakers offer a variety of models specifically tailored for demands of higher fidelity applications.  Designed for clarity and presence, these loudspeaker systems deliver pristine audio reproduction for installations requiring a refined audio experience.  Models ship complete with the award winning X-Mount™ system and weather input cover.

Certified for Microsoft Teams

Consistent and even conical coverage is achieved through Directivity Matched Transition (DMT™), an innovation which matches the directivity patterns of the woofer and the high-frequency waveguide at the crossover point. The result is a coherent transition between transducers and improved off-axis response.

AcousticDesign models with (T) suffix feature low-loss, low-saturation transformers with selectable taps, including an 8Ω bypass. To enhance weather resistance, the rotary selector is located on the back of the enclosure, protected by a weather grommet.

To further enhance performance and speed of install with optimum result, advanced voicing filter sets using Intrinsic Correction™ techniques are available via Q-SYS.

Installers will appreciate the award-winning X-Mount™ system included with each full-range AcousticDesign model. This ingenious mounting solution achieves unprecedented ease-of-installation in horizontal, vertical, wall, or ceiling deployments. 

Knurled surfaces at the pivot planes ensure the load will not drift or sag over time.  Articulation marks allow pre-configuration of the X-Mount™ while on the ground with no special tools required. Once secure, the loudspeaker installs in seconds, allowing the installer to work safer, smarter, and faster with repeatable results.

Furthermore, AcousticDesign surface-mount speakers may be adapted to third-party mounting solutions or used with the following ball-mount and yoke mount accessories:

                 • AD-S32T: Yoke and ball mount included
                 • AD-S52/S52T: YM-5 Yoke Mount available
                 • AD-S6T/AD-S8T/AD-S10T/AD-S12: X-Mount™
                   included, Yoke Mounts available

With rugged ABS enclosures, sealed input panel covers, and powder-coated aluminum grilles for weather resistance, the AcousticDesign surface mounted series exceed IEC60529 IP-54 ratings for dust and splash resistance.

Designed for all general audio applications, AcousticDesign surface-mount models come in a wide range of sizes, from a compact 3-inch 2-way to a dual 8-inch 2-way and even a dual 8-inch subwoofer. Several models have built-in 70/100 volt distributed line transformers.

Complementing adjacent product families, AcousticDesign surface loudspeakers are available in black (RAL 9011) or white (RAL 9010) and may be painted to match any décor.

SELECT A MODEL

2-Way

  AD-S4T AD-S5T AD-S6 AD-S6T AD-S8T AD-S10T AD-S12
Effective frequency range1 68 - 20k Hz 65 – 20k Hz 58 - 20k Hz 60 – 20k Hz 55 – 20k Hz 50 – 19k Hz 52 – 20k Hz
Rated noise
power / voltage2
50 W / 20 V (rms) 100 W / 28 V (rms) 150 W / 49 V (rms) 150 W / 35 V (rms) 200 W / 40 V (rms) 250 W / 45 V (rms) 300 W / 50 V (rms)
Sensitivity3 87 dB SPL 86.3 db SPL 89 dB SPL 89 dB SPL 90 dB SPL 92 dB SPL 95 dB SPL
Coverage Angle
(-6 dB)
120° conical DMT™ 115° conical DMT™ 105° conical DMT™ 105° conical DMT™ 105° conical DMT™ 90° conical DMT™ 75° conical DMT™
Output4
(Peak SPL @ 1M)
110 dB 112 dB 116 dB 116 dB 119 dB 122 dB 126 dB
Driver Information:

LF


HF



 

4.5" weather treated paper cone woofer, 1" / 25 mm voice-coil

0.75" silk dome tweeter / 0.75" voice coil, horn loaded

5.25" paper cone woofer, 1" voice coil

1" damped fabric dome tweeter, 1" voice coil

6.5" weather treated paper cone woofer, 
1.5"/38 mm voice-coil

1" silk dome tweeter / 1" voice-coil horn loaded

6.5" weather treated paper cone woofer, 
1.5"/38 mm voice-coil

1" silk dome tweeter / 1" voice-coil horn loaded
8" weather treated paper cone woofer, 2" / 51 mm voice-coil

1" exit / 1.4" voice-coil compression driver 
10" weather treated paper cone woofer, 2.5"/ 64 mm voice-coil

1" exit / 1.4" voice-coil compression driver 
12" weather treated paper cone woofer, 3"/ 76 mm voice-coil

1" exit / 1.4" voice-coil compression driver 
Transform Max Tap 70 V: 30 W
100 V: 30 W
70 V: 60 W
100 V: 60 W
No transformer 70 V: 60 W
100 V: 60 W
70 V: 60 W
100 V: 60 W
70 V: 100 W
100 V: 100 W
No transformer
Rated Impedance 8 Ω 8 Ω 16 Ω 8 Ω 8 Ω 8 Ω 8 Ω
Input Connectors Euroblock connector with parallel output terminals
Enclosure Painted ABS polymer
Ingress protection IP-54
Net Weight 6.5 lb / 2.9 kg 9.9 lbs / 4.5 kg 11.6 lb / 5.26 kg 13.6 lb / 6.2 kg 24.1 lb / 11 kg 31 lb / 15 kg 35 lb / 16 kg
  Details Details Details Details Details Details Details

1 Free-field, -10 dB from on-axis sensitivity.
2 IEC60268-1 noise signal for 2 Hrs.
3 On-Axis, free-field sensitivity, 2.83V, 1 m.
Calculated from rated noise voltage and sensitivity

All specifications are subject to change without notice.

Legacy Models

Model AD-S282H
Frequency Range, -10 dB 60 Hz - 29.5 kHz
Nominal Coverage 90° H x 60° V
Power Capacity1 450 W (8 hours)
Sensitivity2 93 dB
LF Driver Information Dual 8 in high power, 
treated paper cone, 
2 in voice coil, 
neodymium magnet
HF Driver Information 1 in high output 
compression driver
Controls / Selectors 70V 200, 100, 50, 25 W
100V 200, 100, 50 W
8Ω Selectable
Rotary Knob
Connectors Barrier strip, 
(switchable: passive/active
on AD-S282H)
Dimensions (HWD) inches -
Dimensions (HWD) mm -
Weight 27.7 lb / 12.6 kg
  Details

Continuous IEC specified test signal, 2 hours unless otherwise stated.
Based on nominal impedance, measured in full space. 1 W @ 1 m.

All specifications are subject to change without notice.

 

Subwoofers

Model AD-S112sw AD-S28Tw
System Type 12 inch Subwoofer Surface-mount bandpass subwoofer, ported 
Low-frequency Transducer 12 inch woofer, 2.5 inch voice coil  Dual 8 inch (200 mm) weather resistant,
polypropylene cone woofers, rubber surround
Frequency Response (-6 dB)1 30 Hz - 135 Hz 42 Hz - 165 Hz
Filter N/A 120 Hz low-pass, passive, bypassable
Max Continuous Output2:
half space / full space 
121 dB SPL / 115 dB SPL 118 dB SPL / 112 dB SPL
Nominal Impedance
Rated Noise Power 300 W (2 hours AES2 - 1984) 250 W (2 hours IEC)
Sensitivity 90 dB 94 dB
Transformer Type N/A Custom low distortion laminated core,
wide bandwidth design
Transformer Taps N/A 70V: 200, 100, 50, 25 W
100V: 200, 100, 15 W
8Ω selected by switch
Environmental Exceeds Mil Spec 810 for humidity, salt spray and dust;
IEC 60529 IP-54 splash rating
Exceeds Mil Spec 810 for humidity, salt spray and dust;
IEC 60529 IP-X4 splash rating
Connectors Euroblock 4 position barrier strip; 2 in / 2 out
Dimensions (HWD) inches 23.5 x 13.9 x 12.7 15.9 x 9.9 x 22.75
Dimensions (HWD) mm 596 x 354 x 323 404 x 251 x 603
Weight 29 lb / 13.2 kg 43 lb / 19.5 kg
  Details Details

1 Measured free field.
2 Pink noise within specified frequency range at 1m at rated RMS power.

All specifications are subject to change without notice.

SUB/SAT

  AD-S.SUB AD-S.SAT
Systems Type Subwoofer Satellite loudspeaker
Frequency Range,
-10dB(Hz)
45 Hz - 150 Hz 150 Hz - 20 kHz
Nominal Coverage N/A 170° Conical
Output (Peak SPL @ 1M) 106 dB 96 dB
Rated noise power 100 W 25 W
Sensitivity 86 dB 82 dB
LF Driver 6.5 in (165 mm)
dual voice-coil
N/A
HF Driver N/A 2.75 in (70 mm)
Transformer Taps 70 V : 100, 50, 25, 12.5 W and bypass
100 V : 100, 50, 25 W and bypass
Bypass: 4 Ω mono or 8 Ω + 8 Ω stereo
16 Ω
Connectors Hi-Pass Mono Input: 4-pole Euroblock with thru output
Low-Z Input: 4-pole Euroblock, Left (mono) and Right
Hi-Pass Mono Output: x2 4-Pole Euroblock for x4 satellites
2-pole Euroblock
Dimensions
(H x W x D) inches
13.8 x 8.2 x 17 3.6 x 3.5 x 5.4
Including wall bracket
Dimensions
(H x W x D) mm
350 x 209 x 432 92.5 x 89 x 136
Including wall bracket
Net Weight 23.6 lb (10.7 kg) .95 lb (0.43 kg)
  Details Details

All specifications are subject to change without notice

Accessories

  Yoke Mount Eyebolt Kit
AD-S4T  N/A  N/A
AD-S6T  N/A  N/A
AD-S8T AD-YMS8 M10 kit-C
AD-S10T AD-YMS10 M10 kit-C
AD-S12T AD-YMS12 M10 kit-C
AD-S112sw AD-YMS12 M10 kit-C
AD-S32T AD-YM5  N/A
AD-S282H  N/A  N/A
AD-S28Tw  N/A  N/A