• Hero view of three models of the AcousticCoverage Series
  • Hero front and side profile view of two models of AcousticCoverage Series in-ceiling speakers

AcousticCoverage™ is designed to offer sound system designers and installers a cost effective solution for applications where voice reinforced coverage is of primary concern, while providing improved musicality often not seen in typical paging or BGM class products.  Achieveing remarkable performance for the cost, AcousticCoverage is ideally suited for wide area deployments such as office buildings,  healthcare facilities, transportation terminals, and other cost sensitive installations.

  • High quality transducers provide exceptional clarity through the critical voice range.
  • Ported baffle for increased low frequency extension.*
  • Low saturation 70/100V transformers with 8 ohm bypass.
  • Advanced voicing filter sets using Intrinsic Correction™ via Q-SYS™ Platform.
  • Available in White (RAL 9010).

*For UL Rated Versions only

SELECT A MODEL

                                  UL Rated Non-UL Rated
  AC-C2T AC-C2T-LP AC-C4T  AC-C6T AC-C8T AC-C4T-nb AC-C8T-nb

Frequency Range, -10 dB (Hz)

70 Hz - 20 kHz 70 Hz - 20 kHz 70 Hz - 16 kHz 65 Hz - 20 kHz 52 Hz – 20 kHz 62 Hz – 18 kHz 53 Hz – 20 kHz

Nominal Coverage

170° conical 170° conical  140° conical 110° conical 100° conical 140° conical 130° conical

Rated noise power1

16 W 16 W 16 W 30 W 80 W 6 W 6 W

Broad-band sensitivity2

84 dB 84 dB 89 dB 89 dB 89 dB 93 dB 96 dB

Driver

2.75-inch treated paper cone with rubber surround 2.75-inch treated paper cone with rubber surround 4.5-inch polypropylene cone with rubber surround 6.5-inch polypropylene cone with rubber surround  8-inch polypropylene cone with rubber surround 4.5-inch Paper Cone 8-inch Paper Cone with Whizzer

Transformer Taps

70 V: 16, 8, 4, 2, 1 W
100 V: 16, 8, 4, 2, 1 W
8Ω Externally Selectable
70 V: 16, 8, 4, 2, 1 W
100 V: 16, 8, 4, 2, 1 W
8Ω Externally Selectable
70 V: 16, 8, 4, 2, 1 W
100 V: 16, 8, 4, 2, 1 W
8Ω Externally Selectable
70 V: 30, 15, 7.5, 3.7, 1.9 W
100V: 30, 15, 7.5, 3.8, 1 W
8Ω Externally Selectable 
70 V: 60, 30, 15, 7.5, 3.8 W
100 V: 60, 30, 15, 7.5 W
8Ω Externally Selectable
70 V: 6, 3, 1.5, 0.75 W
100V: 6, 3, 1.5 W
70 V: 6, 3, 1.5, 0.75 W 100V: 6, 3, 1.5 W

Input Connectors

Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals  Euroblock connector with parallel output terminals  Euroblock connector with parallel output terminals Bare wire including parallel through Bare wire including parallel through

Dimensions (WD) inches

8.4 x 7.9 in 10.4 x 3.8 in 8.4 x 7.9 in 10.24 × 8.4 in 12.4 × 11.3 in 8.11 x 3.75 in 11.14 x 3.3 in

Dimensions (WD) mm

214 x 201 mm 263 x 97 mm 214 x 201 mm 260 × 213 mm 381 x 381 mm 206 x 95 mm 283 x 84 mm

Net Weight

4.2 lb / 1.9 kg 4.2 lb / 1.9 kg 4.9 lb / 2.22 kg 7.6 lb / 3.5 kg 11.5 lb / 5.2 kg 2.6 lb / 1.2 kg 3.4 lb / 1.5 kg
  Details Details Details Details Details Details Details

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space. 1 W @ 1 m.