Lowest of the Lows

Our design innovations aren’t limited to our screen channel loudspeakers.  We also offer industry-leading subwoofers and surround loudspeakers:

 

DCS subwoofers are available in a variety of single and dual 18-inch driver enclosures.

When 18-inch woofers aren’t quite enough, the ultra bottom-end is covered with the awe-inspiring 21-inch SB-15121.

Our Subwoofers bring earth-shaking realism to the cinema experience, driving home the impact of explosive soundtrack action. Our high quality MDF and plywood subwoofer enclosures feature large, fully radiused and flared ports that smooth airflow at high levels to minimize noise from port turbulence. Symmetrical spacing of ports relative to drivers creates uniform internal pressure to prevent distortion and damage.

In dual-driver systems, the box is completely divided into single-woofer chambers for greater strength and rigidity, allowing each driver to function normally in the rare event that the other fails. With both single- and dual-driver models to choose from, our subwoofers excel at clean, punchy lows, delivering excitement you can feel to every seat.

SELECT A MODEL

  SB-1180 SB-7118 SB-15121 SB-118F
System Type 18"
subwoofer
18"
subwoofer
21" subwoofer  18" flyable subwoofer
Frequency Range at -10 dB (Hz) 1 29 Hz - 170 Hz 22 Hz - 100 Hz 23.8 Hz - 100 Hz 32 Hz – 230 Hz
Peak Output2 125 dB 125 dB 137 dB 133 dB
Nominal Impedance
Rated Noise Power3 600 W RMS 750 W RMS 2500 W RMS  
Sensitivity4 98 dB 98 dB 99 dB 98 dB
Driver Information 18" (457 mm) 600 W high-efficiency
subwoofer featuring
4" (100 mm) copper
voice coil
18" (457 mm) 700 W high-efficiency
subwoofer transducer
featuring 4" (100 mm)
copper voice coil
21" (533 mm)
high efficiency
subwoofer transducer
featuring a vented
6" (153 mm) copper
voice coil on
a fiberglass former.
18" (457 mm) driver with 4" (101 mm) voice coil
Dimensions (HWD) inches 35.9 x 30 x 11.7 35.75 x 30 x 20.3 48.8 x 30 x 24 23.2 x 24.2 x 23.6
Dimensions (HWD) mm 912 x 762 x 297 908.1 x 762 x 516 1238 x 762 x 610 590 x 616 x 615
Weight 97 lb / 43.5 kg 162 lb / 73.3 kg 231 lb / 105 kg 95 lb / 43 kg
  Details Details Details Details

1 All frequency ranges specified refer to measured response (half space, 2 pi).
2 Calculated SPL at 1m, (half space, 2 pi), speaker operating at rated RMS power with pink noise within specified frequency range.
3 2 hours of 6 dB crest factor pink noise, AES method.
4 1 watt /1 meter, half space.
5 Preliminary

 


 

All models connect with Barrier strip screw terminals that accept up to #10 AWG stranded wire.

All specifications are subject to change without notice.

  SB-2180 SB-7218 SB-218F
System Type 2 x 18" subwoofer 2 x 18" subwoofer 2 x 18" flyable subwoofer
Frequency Range at -10 dB (Hz) 1 25 Hz - 150 Hz 22 Hz - 100 Hz 32 Hz – 230 Hz
Peak Output2 136 dB5 137 dB 139 dB
Nominal Impedance 4Ω 
Rated Noise Power3 1100 W RMS 1500 W RMS  
Sensitivity4 100 dB5 101 dB 101 dB
Driver Information Two 18" (457 mm)
550 W high-efficiency
 subwoofers featuring 4" (100 mm) copper voice coils
Two 18" (457 mm)
700 W high-efficiency
subwoofer transducers
featuring 4" (100 mm)
copper coils
Two 18" (457 mm) drivers with 4" (101 mm) voice coils
Dimensions (HWD) inches 33.15 x 42.5 x 16.5 30 x 48 x 24 46.5 x 23.2 x 25.25
Dimensions (HWD) mm 842 x 1080 x 420 762 x 1220 x 610 1180 x 595 x 640
Weight 187 lb / 85 kg 210 lb / 95 kg 168 lb / 76.4 kg
  Details  Details Details

 

1 All frequency ranges specified refer to measured response (half space, 2 pi).
2 Calculated SPL at 1m, (half space, 2 pi), speaker operating at rated RMS power with pink noise within specified frequency range.
3 2 hours of 6 dB crest factor pink noise, AES method.
4 1 watt /1 meter, half space.
5 Preliminary

All models connect with Barrier strip screw terminals that accept up to #10 AWG stranded wire.

All specifications are subject to change without notice.