Certified for Microsoft Teams badge

Caractéristiques

  • Woofer basse fréquence de 8 pouces
  • Moteur de compression à diaphragme de 1,4 pouces
  • Puissance nominale continue de 200 watts
  • Transformateur de sortie 70/100 V à multiples réglages inclus (le système peut fonctionner en mode distribué ou faible impédance)
  • AD-C821 conçue comme un système pour faux plafond entièrement intégré

L’AD-C821 est vendue dans les systèmes suivants :

  • SYSTÈME AD-C821R
    • Système de montage AD-C821 pour faux plafond
    • Anneau d’attache et rails de fixation
    • Grille ronde AD-C800RG (blanche, à peindre)
  • SYSTÈME AD-C821S
    • Système de montage AD-C821 pour faux plafond
    • Anneau d’attache et rails de fixation
    • Grille carrée AD-C800SG (blanche, à peindre)

 

 
SPECIFICATIONS
 
AD-C821
Configuration Passive
Low-frequency Transducer 8-inch (203 mm) ferrite woofer
Hight-frequency Transducer 1.4-inch (36 mm) neodymium compression driver
Frequency Range 1
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB)

61 Hz to 18 kHz
52 Hz to 18 kHz
Maximum Output 2
Calculated Peak Output
Calculated Continuous Output

120 dB SPL
114 dB SPL
Nominal Coverage 90° conical DMT™
Nominal Impedance 16 ohms
Power Rating
Continuous power handling3
Recommended amplifier power
(loudspeaker "program" power)

200 W
400 W
Sensitivity 91 dB SPL, 1W/1m
Bass Loading Ported
Transformer Type Custom low distortion laminated core, wide bandwidth design
Transformer Taps 100 V: 16 ohms bypass, 100 W, 50 W, 25 W
70 V: 16 ohms bypass, 100 W, 50 W, 25 W, 12.5 W
Agency Rating CE, UL 1480 (commercial/professional use) UL 2043 (air handling spaces)

ENCLOSURE

Enclosure Volume 18 liter (0.64 ft³)
Connectors Two 2-pin Euro-style connectors
Mounting Hardware Captive, integral Mounting Clamps. Insert enclosure into mounting
hole, and tighten. Suspended ceiling Split-ring and
Suspended Ceiling Tile Rails - sold separately.
Weight - Net 16 lb (7.3 kg)
Dimensions Diameter: 13.4-inch (340 mm)
Depth: 11.9-inch (302 mm)

1 All frequency ranges specified refer to measured half-space response (2 pi).
2 Calculated maximum peak SPL at 1 m, half-space, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.
3 Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.

Specifications are subject to change without notice.

QSC and the QSC logo are registered trademarks of QSC Audio Products LLC in the U.S. Patent and Trademark office and other countries.
AcousticDesign is a trademark of QSC Audio Products, LLC. MATE-N-LOK is a trademark of Tyco. All other trademarks are the property of their respective owners.