Serie PL

Altavoces de rendimiento para Q-SYS

La Serie PL de Q-SYS es una gama de altavoces de alto desempeño para instalaciones, diseñados con el fin de ofrecer un sonido premium a los sistemas Q-SYS en una amplia variedad de aplicaciones del ámbito del entretenimiento, empresarial o en entornos de educación superior. La Serie PL brinda una amplia variedad de formatos (arreglo lineal, fuente puntual y subwoofer) que permiten adaptarlos a diversos espacios. La experiencia de audio que ofrecen los altavoces de la Serie PL se completa con la potencia y el rendimiento de la plataforma Q-SYS, que proporciona una instalación simplificada y perfiles de altavoces personalizados, potencia fiable con los amplificadores en red, telemetría avanzada, monitoreo y control personalizable de usuario. 

Ofrezca el sistema ideal a sus clientes

Los altavoces de la Serie PL proporcionan abundantes opciones para lograr siempre la solución correcta en cualquier lugar del espacio que precise audio de alto rendimiento. Cada modelo cuenta con una caja acústica (IP54) tratada y reforzada para soportar las inclemencias del tiempo, por lo que es la elección ideal en aplicaciones interiores o exteriores protegidas.

Control y monitoreo totales en espacios de entretenimiento

La plataforma Q-SYS ofrece un motor de control con todas las características que le permite incorporar el nivel exacto de control de usuario deseado y la visibilidad del sistema de cada encargado en el recinto. Mientras, Q-SYS Reflect Enterprise Manager le permite monitorear y administrar la integridad de su sistema desde cualquier lugar.

Una experiencia Q-SYS impecable

Los altavoces de rendimiento de la Serie PL son parte de la completa gama de productos Q-SYS
que ofrecen una experiencia integral de audio, video y control para todo el espacio, desde
auditorios o salones de conferencias hasta espacios deportivos y de artes escénicas.

                   SELECCIONE UN MODELO

Arreglo lineal

  PL-LA8 PL-LA12
Enclosure Configuration: Bass Reflex, two-way passive/bi-amp line array loudspeaker
Tranducers: LF: 8 in (200 mm), 2 in (50 mm) voice coil, neodymium magnet
HF: Compression driver, 1 in (25 mm) exit, 1.75 in  (44 mm) voice coil
LF: 12 in (320 mm), 2.5 in (64 mm) voice coil, neodymium magnet
HF: 2x compression driver, 1 in (25 mm) exit, 1.75 in  (44 mm) voice coil
Coverage (horizontal x vertical): 100° x 15° 90° x 15°
System bandwidth (-10 dB with EQ) 61 Hz-20 kHz (no subwoofer) 53 Hz-20 kHz (no subwoofer)
System Sensitivity 101.2 dB @ 1 W/1 m 102.3 dB @ 1 W/1 m
Max SPL* (continuous) 132.5 dB @ 1 W/1 m 132.5 dB @ 1 W/1 m
System Power Rating 46 Vrms, continuous 250 W @ 8 Ω 49 Vrms, continuous 300 W @ 8 Ω
Connectors 2x Speakon NL4 (cable connector not provided)
1x Euroblock (parallel to Speakon): Solid wire 8-24 AWG, 4 poles
Recommended Amplifiers Q-SYS CX-Q Series 4ch network amplifiers
up to four (4) loudspeakers per channel on CX-Q 8K4
up to two (2) loudspeakers per channel on CX-Q 4K4
Rigging angles 0.5, 1.5, 3, 4.5, 6, 8, 10, 12
Enclosure Material: Impact-resistant ABS
Enclosure Color: Black (RAL 9011)
Weatherization IP54
Stainless screws
UV and Corrosion treated grille
Aluminum Rigging
Hydrophobic Stainless Steel Mesh behind grille
Input cup (IP65) sealing with gland
Dimensions 10.7 x 20.1 x 13.7 in (272 x 512 x 349 mm) 15.4 x 24.4 x 15.8 in (392 x 620 x 381 mm)
Weight 30 lb (13.5 kg) 47 lbs (21.5 kg)

 

 

*1 m on-axis in free space; continuous IEC noise 6 dB crest factor into power rating
All specifications are subject to change without notice.

Fuente puntual

  PL-DC24 PL-DC26 PL-DC8 PL-DC12
Tranducers: LF: 2x 4 in (102 mm), 1.3 in (33 mm) voice coil, neodymium
HF: Compression driver, 0.7 in (18 mm) exit, 1 in (25 mm) voice coil
LF: 2x 6 in (170 mm), 1.7 in (44 mm) voice coil, neodymium
HF: Compression driver, 1 in (25 mm) exit, 1.75 in (44 mm) voice coil
LF: 8in (200 mm), 2 in (50 mm) voice coil, neodymium
HF: Compression driver, 1in (25 mm) exit, 1.75in (44 mm) voice coil
LF: 12in (320 mm), 3 in (75 mm) voice coil, neodymium
HF: Compression driver, 1.4in (36 mm) exit, 3 in (75 mm) voice coil
Enclosure Configuration: Two-way, passive point source loudspaker in bass reflex enclosure
Coverage (horizontal x vertical): 110° x 50° Symmetrical: 120° x 50°, 90° x 50°
Asymmetrical: 105° (60° + 45°) x 50°
Symmetrical: 90° x 50°, 70° x 50°, 110° x 50°
Asymmetrical: 100° (55° + 45°) x 50°, 90° (55° + 45°) x 50° , 80° (45° + 35°) x 50°
System Sensitivity 97.3 dB @ 1 W/1 m 102.2 dB @ 1 W/1 m 99.3 dB @ 1 W/1 m 102 dB @ 1 W/1 m
Max SPL* (continuous) 114 dB 121 dB 118 dB 124 dB
Enclosure Material: Exterior plywood
Enclosure Color: Black (RAL 9011)
Weatherization IP54
External plywood
Stainless screws
Treated grille vs. UV and corrosion
Hydrophobic stainless steel mesh behind grille
Polyurea Paint
Input cup (IP65) sealing with gland
Recommended Amplifiers Q-SYS CX-Q Series 4ch network amplifiers
up to four (4) loudspeakers per channel on CX-Q 4K4
up to two (2) loudspeakers per channel on CX-Q 2K4
Q-SYS CX-Q Series 4ch network amplifiers
up to four (4) loudspeakers per channel on CX-Q 8K4
up to three (3) loudspeakers per channel on CX-Q 4K4
up to two (2) loudspeakers per channel on CX-Q 2K4
Q-SYS CX-Q Series 4ch network amplifiers
up to four (4) loudspeakers per channel on CX-Q 8K4
up to three (2) loudspeakers per channel on CX-Q 4K4

 

     

*1 m on-axis in free space; continuous IEC noise 6 dB crest factor into power rating
All specifications are subject to change without notice.

Subwoofer

  PL-SUB10 PL-SUB12 PL-SUB15 PL-SUB18
Tranducers LF: 10 in (250 mm), 3 in (75 mm) voice coil LF: 12 in (300 mm), 3 in (75 mm) voice coil LF: 15 in (380 mm), 4 in (100 mm) voice coil LF: 18 in (460 mm), 4 in (100 mm) voice coil
Enclosure Configuration Passive subwoofer in bass reflex enclosure
Coverage Omnidirectional Omni-directional or cardioid radiation modes selectable in Q-SYS; cardioid setup requires minimum two (2) units
System bandwidth (-10 dB with EQ) 43-100 Hz Sub Crossover = 80
43-110 Hz Sub Crossover = 100
43-140 Hz Sub Crossover = 125
40-100 Hz Sub Crossover = 80
40-110 Hz Sub Crossover = 100
40-140 Hz Sub Crossover = 125
38-100 Hz Sub Crossover = 80
38-110 Hz Sub Crossover = 100
38-140 Hz Sub Crossover = 125
34-100 Hz Sub Crossover = 80
34-110 Hz Sub Crossover = 100
34-140 Hz Sub Crossover = 125
System Sensitivity 90 dB 1W/1m 93 dB 1W/1 m 97.5 dB 1 W/1m 96 dB 1 W/1 m
Max SPL* (continuous) 132 dB 137 dB 139 dB 140 dB
Enclosure Material Exterior plywood
Enclosure Color Black (RAL 9011)
Connectors 2x Speakon NL4 (cable connector not provided)
1x Euroblock (parallel to Speakon): Solid wire 8-24 AWG, 4 poles
Weatherization IP54 
External plywood
Stainless screws
Treated grille vs. UV and corrosion
Hydrophobic stainless steel mesh behind grille
Polyurea Paint
Input cup (IP65) sealing with gland
Recommended Amplifiers Q-SYS CX-Q Series 4ch network amplifiers
up to two (2) loudspeakers per channel on CX-Q 8K4 
up to one (1) loudspeaker per channel on the CX-Q 4K4
Q-SYS CX-Q Series 4ch network amplifiers
up to two (2) loudspeakers per channel on CX-Q 8K4 
Dimensions 10.8 x 16.7 x 20 in (275 x 425 x 510 mm) 12.7 x 20.6 x 24 in (325 x 525 x 610 mm) 14.7 x 23.5 x 27.1 in (375 x 598 x 690 mm) 20.9 x 24.4 x 28.7 (531 x 620 x 730 mm)
Weight 41.8 lb (18.96 kg) 53.1 lb (24.1 kg) 80 lb (36.3 kg) 102.2 lb (46.3 kg)

*1 m on-axis in free space; continuous IEC noise 6 dB crest factor into power rating
All specifications are subject to change without notice.

Coaxial

  PL-CA5 PL-CA6 PL-CA8 PL-CA12 PL-CA15
Enclosure Configuration Two-way, full-range coaxial loudspeaker in bass reflex enclosure
Tranducers LF: 5 in (127mm), 1.5 in (38 mm) voice coil 
Coaxial tweeter:  1 in (25mm) voice coil
LF: 6 in (170 mm), 1.75 in (44.5 mm) voice coil
Coaxial HF: compression driver, 1.4 in (35.5 mm) voice coil
LF: 8 in (200 mm), 2 in (50.8 mm) voice coil, neodymium
Coaxial HF: compression driver, 1.4 in (35.5 mm) voice coil
LF: 12 in (320 mm), 3 in (72.6 mm) voice coil, neodymium
Coaxial HF: compression driver, 3 in (76.2 mm) voice coil
LF: 15 in (380 mm), 3 in (72.6 mm) voice coil, neodymium
Coaxial HF: compression driver, 3 in (76.2 mm) voice coil
Coverage 110° conical DMT 120° conical DMT 125° conical DMT 90° conical DMT 85° conical DMT
System Bandwidth (-10 dB with EQ) 72 Hz - 20 kHz
(no subwoofer)   
61 Hz - 20 kHz
(no subwoofer) 
63 Hz -20 kHz
(no subwoofer)
44 Hz -20 kHz
(no subwoofer)
37 Hz -20 kHz
(no subwoofer)
System Sensitivity 88 dB 1W/1m 92 dB  1W/1m 97 dB 1W/1m 102 dB 1W/1m 100.5 dB 1W/1m
Max SPL* (continuous) 105 dB 112 dB 115 dB 120 dB 122 dB
Connectors 1x Euroblock: Solid wire 14 AWG, 4 poles 1x Euroblock: Solid wire 14 AWG, 4 poles 2x Speakon NL4
1x Euroblock: Solid wire 8 AWG, 4 poles
2x Speakon NL4
1x Euroblock: Solid wire 8 AWG, 4 poles
2x Speakon NL4
1x Euroblock: Solid wire 8 AWG, 4 poles
Recommended Amplifiers CX-Q 8K4
(up to 8 per ch)

CX-Q 4K4
(up to 6 per ch) 

CX-Q 2K4
(up to 4 per ch)
CX-Q 8K4
(up to 4 per ch)

CX-Q 4K4
(up to 3 per ch) 

CX-Q 2K4
(up to 2 per ch)
CX-Q 8K4
(up to 4 per ch)

CX-Q 4K4
(up to 3 per ch) 

CX-Q 2K4
(up to 2 per ch)
CX-Q 8K4
(up to 4 per ch)

CX-Q 4K4
(up to 2 per ch) 

CX-Q 2K4
(1 per ch)
CX-Q 8K4
(up to 4 per ch)

CX-Q 4K4
(up to 2 per ch) 

CX-Q 2K4
(1 per ch)
Enclosure Material: Exterior plywood
Enclosure Color: Black (RAL 9011)
Weatherization IP54 
External plywood
Stainless screws
Treated grille vs. UV and corrosion
Hydrophobic stainless steel mesh behind grille
Polyurea Paint
Input cup (IP65) sealing with gland
Dimensions 7.1 x 7.9 x 7.1 in  
(181 x 200 x 180 mm)
12.5 x 8.7 x 7.1 in
(316 x 220 x 180.5 mm)
16.1 x 11 x 9.3 in
(410 x 280 x 236 mm)
23.5 x 15.7 x 13.8 in
(597 x 400 x 350.4 mm)
26 x 17.3 x 15.2 in
(660 x 440x 386.5 mm)
Weight 8.8 lb (4 kg) 13.4 lb (6.1 kg) 24 lb (10.9 kg) 44  lb (20 kg) 50.7 lb (23 kg)
Optional Accessories (sold separately)  PL-CA5-YM horizontal yoke mount
PL-DC24-FM flush mount (ceiling or wall)
PL-CA6-YM horizontal yoke mount PL-CA8-YM horizontal yoke mount PL-CA12-YM horizontal yoke mount
PL-CA12-SL Link to suspend PL-CA12 with PL-SUB15
PL-CA15-YM horizontal yoke mount