PL-LA Accessories
---------------------------------------------

PL-LA12-AF Array Frame for PL-LA12

The Array Frame for PL-LA12 shall be a zinc plated metal steel frame with a 1000h UV and 200 hours salt spray test powder coating. It should provide a traceability identifier. 

The array shall provide 3 sets of 11 rigging points spaced by 50.8mm on the exterior of the frame as well as on the center spine. The array frame shall allow mounting the PL-LA12 loudspeaker array in normal position for maximum down-tilt angle or with a reversed frame for maximum up-tilt angle. The array frame shall also allow ground stacking the PL-LA loudspeaker array and flying an array of PL-SUB18 sub-basses. 

The Array Frame shall be 3.8 in (97 mm) high, 22.95 in (583 mm) wide, and 27.7 in (704 mm) deep. The Array Frame shall have a net weight of no more than 32 lb (14.3 kg). 

The Array Frame for PL-LA12 shall be the Q-SYS PL-LA12-AF.

---------------------------------------------

PL-LA8-AF Array Frame for PL-LA8

The Array Frame for PL-LA8 shall be a zinc plated metal steel frame with a 1000h UV and 200 hours salt spray test powder coating. It should provide a traceability identifier. 

The array shall provide 3 sets of 11 rigging points spaced by 50.8mm on the exterior of the frame as well as on the center spine. The array frame shall allow mounting the PL-LA8 loudspeaker array in normal position for maximum down-tilt angle or with a reversed frame for maximum up-tilt angle. The array frame shall also allow ground stacking the PL-LA loudspeaker array.

The Array Frame shall be 3.8 in (97 mm) high, 18.7 in (475 mm) wide, and 27.7 in (704 mm) deep. The Array Frame shall have a net weight of no more than 30 lb (13.6 kg). 

The Array Frame for PL-LA8 shall be the Q-SYS PL-LA8-AF.

---------------------------------------------

PL-LA12-PB Pull Back for PL-LA12

The Pull Back for PL-LA12 shall be a zinc plated metal steel frame with a 1000h UV and 200 hours salt spray test powder coating. It should provide a traceability identifier. 

The Pull Back shall attach to the loudspeaker at the top front or back rear.

The Pull Back shall be 2.46 in (62.5 mm) high, 22.95 in (583 mm) wide, and 3.97 in (100.8 mm) deep. The Pull Back shall have a net weight of no more than 5 lb (2.08 kg). 

The Pull Back for PL-LA12 shall be the Q-SYS PL-LA12-PB.

---------------------------------------------

PL-LA8-PB Array Frame for PL-LA8

The Pull Back for PL-LA8 shall be a zinc plated metal steel frame with a 1000h UV and 200 hours salt spray test powder coating. It should provide a traceability identifier.

The Pull Back shall attach to the loudspeaker at the top front or back rear.

The Pull Back shall be 2.46 in (62.5 mm) high, 18.7 in (475 mm) wide, and 3.97 in (100.8 mm) deep. The Pull Back shall have a net weight of no more than 3 lb (1.6 kg).

The Pull Back for PL-LA8 shall be the Q-SYS PL-LA8-PB.