Architect and Engineer’s Specifications: 
NV-32-H Network Video Endpoint

The network video endpoint shall be a component in a distribution system that routes 4K60 4:4:4 video over a Gigabit Ethernet network. It shall use Q-SYS Shift™ data compression to ensure highest quality with very low latency. The endpoint shall have three HDMI 2.0 Inputs and two HDMI 2.0 outputs and shall be fully compliant with HDCP 1.4 and 2.2. It shall also shall support AV bridging with QSC Q-SYS PTZ-12x72 and PTZ-20x60 cameras. It shall also have an RJ45 network port with Power over Ethernet (802.3bt) compatibility.
The network video endpoint shall natively route audio data through a QSC Q-SYS network without needing to use AES67 or the Q-SYS Media Stream Receiver. Its sound card-level stereo analog audio inputs and outputs shall be on 3.5 mm TRS connectors. It shall function as a transmitter or as a receiver, depending on the configuration by the user. 
The network video endpoint shall be mountable in a standard AV rack or on a surface. It shall be a half rack space wide and one rack unit (1.75 inch) tall, allowing it to be mounted beside other half-rack equipment such as the Q-SYS I/O-8 Flex and QSC SPA Series power amplifiers. 
The network video endpoint shall be powered by a 48-volt external power supply or through the network port using Power over Ethernet. 
The network video endpoint shall be the QSC Q-SYS NV-32-H.