NC-90-G2

The video camera shall have an RJ-45 connector for connecting to a 1000 Mbps Ethernet network. The camera shall only be powered via Power over Ethernet (PoE Type 1, Class 3). The camera shall use the network for transmitting video to one or more bridging endpoints without the need for USB extenders. The camera shall also use the network for control and monitoring.

The camera shall have a 1/1.8” CMOS 20MP image sensor with a horizontal field of view of 90°. The camera shall utilize electronic pan, tilt, and zoom (ePTZ) to output an IP video stream from the camera directly to the bridging endpoint. The ePTZ shall be controlled exclusively via the network. The camera output shall have a 16:9 aspect ratio.

The camera shall include a bracket to allow for the camera to be surface mounted or monitor mounted. The bracket shall be removable to allow users to affix the camera to generic mounting hardware.

The camera shall have an operating temperature range of 0°C - 40°C and a storage temperature range of -40°C - 60°C. The camera shall weigh no more than 0.7 kg and shall not exceed 252.2mm x 56.5mm x 104.5mm in size.

The camera shall integrate natively with the QSC Q-SYS Ecosystem for discovery, control, signal routing, firmware management, and bridging.

The camera shall be the QSC Q-SYS NC-90-G2.