Costa Mesa, Calif. (October 18, 2018) – QSC introduces new Q-SYS Networking Solutions, including Q-SYS NS Series network switches and additional networking resources to help cinema technicians simplify installation and increase profitability of Q-SYS-based networked audio, video and control (AV&C) systems. Q-SYS NS Series Network Switches For cinema technicians looking to expedite deployment of Q-SYS on a local network, QSC introduces the Q-SYS NS Series. The NS Series is a range of enterprise-grade, fully managed 1/10GbE network switches that are pre-configured to meet the performance requirements of the Q-SYS Platform and associated third-party networking technologies. Available in 8-port, 24-port and 48-port models, these Dell EMC network switches provide real-time transport of Q-SYS AV&C, as well as AES67 audio streams simultaneously within the same VLAN, all…

QSC, Costa Mesa, CA (October 11, 2018) – Founded in 1982, The Greater Vancouver International Film Festival Society is a not-for-profit cultural organization that operates the internationally acclaimed Vancouver International Film Festival (VIFF) and year-round programming of the Vancity Theatre at the Vancouver International Film Centre. VIFF is among the five largest film festivals in North America, screening films from more than 70 countries on nine screens. The festival spans sixteen days, from September 27, 2018 to October 12, 2018. QSC equipment is utilized in all seven venues, including the hearing assistance equipment in The Centre for the Performing Arts, the location of the opening and closing gala screenings. The project was particularly challenging because The Centre Theatre was not designed as a cinema. There are three seating levels in the 1800-seat…

Costa Mesa, Calif. (October 11, 2018) – [De, Es, Fr] – QSC introduces new Q-SYS Networking Solutions, including Q-SYS NS Series network switches and additional networking resources to help integrators simplify installation and increase profitability of Q-SYS-based networked audio, video and control (AV&C) systems. Q-SYS NS Series Network Switches For integrators looking to expedite deployment of Q-SYS on a local network, QSC introduces the Q-SYS NS Series, a range of enterprise-grade, fully managed 1/10GbE network switches that are pre-configured to meet the performance requirements of the Q-SYS Platform and associated third-party networking technologies. Available in 8-port, 24-port and 48-port models, these Dell EMC network switches provide real-time transport of Q-SYS AV&C, as well as AES67 and Dante audio streams simultaneously within the same VLAN, all without…

Costa Mesa, Calif. (September 19, 2018) – [De, Fr, Es] – QSC is excited to announce the Q-SYS Control Training series. Much like the award-winning Q-SYS Training Level 1 & 2, this new series includes Q-SYS Control 101, which is an online introductory course with 20 new videos that help lay the foundation for programming, and Q-SYS Control 201 classroom training, which applies this foundation onto common third-party meeting room devices and control scenarios, ultimately unleashing the power of Q-SYS Control. Q-SYS Control 101 is ideal for those integrators looking for their first exposure to control programming training, or for those programming experts who want to apply their existing knowledge specifically to the Q-SYS Platform. The online course covers Q-SYS plugins, custom control components, the new Block Controller visual coding tool, and a basic introduction to…

The industry’s gradual drift towards interoperability is making it easier to design futureproofed networks, but increasing levels of traffic and ongoing convergence with IT mean that it’s hardly without challenge.

From the waterpark and pool to the tiki bars and restaurants, there’s no shortage of ways to spend an afternoon at “Margaritaville at Lanier Islands”, the Jimmy Buffet-themed entertainment theme park for the whole family. With construction nearly completed, it was time to implement an AV solution that would serve the entire park, and QSC was prepared for the challenge with the Q-SYS Platform. The network was designed around a Q-SYS Core 110f Unified Processor, which handles audio processing and distribution and third-party control over video routing for the entire park. System integrator dB Integrations deployed AV encoders and decoders from Visionary Solutions along with Q-SYS Control plugins that enable seamless integration of those devices within Q-SYS. Most notably from a control perspective, Q-SYS controls third-party video distribution devices from Visionary…

Costa Mesa, Calif. (August 1, 2018) – [De, Es, Fr] – QSC announces the addition of Q-SYS Designer Asset Manager as part of the latest release of Q-SYS Designer Software v7.1. This new cloud-based feature allows system designers to quickly and easily download and install new Q-SYS assets, including plugins for third-party device control, all without having to wait for new Q-SYS Designer Software releases. “One of the key strengths of the Q-SYS Platform is the ability to integrate nearly any IP-based third party device via its open API with custom scripting and plugins,” says Greg Mattson, Product Manager, Installed Systems, QSC. “The addition of the Asset Manager will empower QSC, as well as approved third-party manufacturers and independent Q-SYS programmers, to contribute to a growing Q-SYS asset library and ultimately expedite the delivery of these resources to…

No teaser available...

Meeting Rooms Case Study

Sinsheim, Germany (11 July 2018) – [Es, De, Fr] – QSC is excited to announce plans for a new EMEA headquarters in Sinsheim, Germany. Located near its current location, this new office is in close proximity to hundreds of enterprise customers in metropolitan areas in Germany, as well as neighboring European countries. “Over the last six months, we have made major investments in expanding our reach throughout EMEA including a new showroom and training center in London,” says Markus Winkler, Senior Vice President, QSC Systems. “Part of our Systems growth strategy is expanding our reach in Europe and focusing on the end user experience along with providing our channel partners additional support and best-in-class training. This kicks off the next phase of this growth in an effort to strengthen customer relationships and provide even deeper levels of support.” The new…

No teaser available...

QSC, Costa Mesa, CA (June 7, 2018) [Fr, Es, De] – At InfoComm 2018 (June 6-7, 2018 in Las Vegas, NV), QSC introduces a new Analog Telephony Card (CTEL4) for use with Q-SYS Core processors or Q-SYS I/O Frames. It includes four RJ-11 interfaces (POTS) for integrators to easily connect Q-SYS to analog telephony environments. “As Q-SYS continues to proliferate into a wide range of meeting rooms, this new I/O card provides integrators additional options for connecting audio in teleconferencing environments,” says Mike Brandes, Product Management, Installed Systems, QSC. “Whether your installation needs audio via USB, VoIP or analog telephony integration, the Q-SYS Platform has a viable solution for nearly every remote communication requirement.” Visitors can learn more about the telephony solution in the QSC Conference Room at its booth N634. To sign up for a demo or to…

Costa Mesa, CA and Jacksonville, OR - (June 6, 2018) [De, Es, Fr] – QSC and Global Caché are excited to announce a partnership that enables the Q-SYS Platform from QSC to easily control Global Caché iTach devices and GC-100 Network Adapters, as well as a connection to its Control Tower IR cloud database. Through these co-developed plugins, integrators can finally bridge the networking gap to IR devices by bringing software-based network control to over 200,000 non-networked IR devices via the Q-SYS Platform, and placing any of these controls onto native Q-SYS touch screen controllers. “The Q-SYS Platform is built around an open standard infrastructure, which has allowed us to advance our integrated control engine to connect to virtually any third-party end point with an available API,” says Greg Mattson, Product Manager for Installed Systems, QSC. “The new…

Sinsheim, Germany (1 June 2018) – [De, Es] – QSC today announced it has begun its partnership with new Industry Market Partners (IMPs) for its systems business, COMM-TEC in Germany and Audiologic in the UK and Ireland. As end users expect direct contact with manufacturers, QSC developed new business processes to better support and meet the needs of both end users and channel partners. The development of IMPs supports this initiative with two specific roles: act as full-service traditional distributors when dealing with national customers, and function as flexible service providers when dealing with the end user’s integrator in country. COMM-TEC serving Germany and Austria COMM-TEC, headquartered near Stuttgart, is a leading pan-European distribution partner and manufacturer of innovative communication technologies. As of January 2018, COMM-TEC also began distributing…

QSC, Costa Mesa, CA (May 31, 2018) – [Fr, Es, De] – QSC introduces a portfolio of Premium Business Music Solutions, including multi-zone mixers, attractive wall controllers, configurable multi-channel amplifiers, SUB/SAT loudspeakers, as well as accompanying installation and management apps for easy configuration and system management. These new products will be showcased at the QSC Demo Room N115 at InfoComm 2018 (June 6-8, 2018) in Las Vegas, NV. “For over 50 years, QSC has been the trusted professional brand for corporate meeting rooms, cinema, sports stadiums, theme parks and everything in between,” says David Fuller, Senior Director Product Development, QSC. “When developing this portfolio, we worked closely with key influencers to really understand the needs of background and foreground music installations.” A recent report from LP Information has shown that…

Meeting Room Case Study

In The News

QSC, Costa Mesa, CA (May 16, 2018) – [De, Es] – QSC is proud to announce its founders, Pat Quilter, Barry Andrews and John Andrews were named this year’s recipients of the prestigious Adele De Berri Pioneer of AV award from AVIXA, the trade association representing the audiovisual industry worldwide. Each year AVIXA recognizes outstanding AV professionals for their contributions to the industry. The Adele de Berri award champions AV and information communications industries by recognizing pioneers who have made scientific breakthroughs resulting in new AV technology that impacts our industry. “In QSC’s first 50 years in business - Pat, Barry and John built a legacy in our industry with powerful, bulletproof and intuitive technologies,” said Joe Pham, President and CEO, QSC and Vice Chairman of the AVIXA Board of Directors. “In addition to our ground-breaking…

Sinsheim, Germany (11 May, 2018) [Fr, Es, De] – QSC today announced two new facilities in the UK - the QSC Showroom in London and a QSC Office and Training Centre in Weybridge. As the company continues to focus on building direct relationships with end customers and channel partners, these facilities allow QSC to expand its footprint in the UK and bolster in-region training, demonstration and support services for system customers. Located in the heart of the financial district in London, the QSC Showroom allows customers to experience a holistic QSC approach to the modern meeting room. The demonstration showcases the Q-SYS Platform, a software-based audio, video and control (AV&C) eco-system that enables centralized processing and integration of popular native and third-party end points on a managed, IT-centric platform. It features native PTZ conference cameras,…

No teaser available...